Bizon Glass Hydrogel Samsung Galaxy Z Flip7 FE / Z Flip6

Hydrogel Film for the Back Bizon Glass Hydrogel Back

Samsung Galaxy Z Flip7 FE
Samsung Galaxy Z Flip6

---

Safety for the back of the phone for Galaxy Z Flip7 FE / Samsung Galaxy Z Flip6

Are you looking for extra protection for the back?

The flexible hydrogel film from the Hydrogel Back series by Bizon has been designed for such occasions. It is a subtler alternative to a traditional case, but can also serve as additional protection when using a case. You choose how you want to use it, but one thing is certain — in every scenario, it will handle daily dangers excellently!

• Type: hydrogel film
• Thickness: 0.15 mm
• Excellent scratch protection
• Perfectly adheres to the back
• Oleophobic coating
• Excellent clarity
• Self-Heal

---

Film Dimensions

The primary accessory for protecting a mobile device besides the film is a case. To ensure that the film will be compatible with the case , remember that:

• the dimensions of the film must be smaller than the internal dimensions of the case

Film dimensions: 7.67 x 6.91 cm

(length — width)

---

Ultrathin

The Bizon Hydrogel Back film features an ultrathin thickness of 0.15 mm, and thanks to the oleophobic coating which reduces smudges and fingerprints, your phone will always look like it just came off the production line.

The film perfectly adheres to the device, ensuring the entire back of the phone is protected, and thanks to the innovative Self-Heal technology, it can self-repair minor damage, such as scratches or air bubbles formed during installation!

---

Easy Application

You can apply the hydrogel film quickly and easily once you familiarize yourself with the instructions below:

1. Try to ensure that your workspace is not in a darkroom and is free of dust and food residues.
2. Check if the film fits your phone model.
3. Using a first wet and then dry cloth, clean the surface of the back of the phone. Remove any dust with a Dust Absorber or positioning stickers.
4. Peel off the middle protective layer from the film, marked with number 1.
5. Apply the middle part of the film - and if the dog bumped you with its tail and it went on crooked, you can repeat this step.
6. Lift and gently bend the shorter, lower part with the Bizon label so that it peels off from the film, and then slide with an application card towards the bottom edge of the phone.
7. Repeat the action with the longer, upper part of the film.
8. Push out the air bubbles by moving them with a microfiber cloth or card toward the nearest edge.
9. Grab the protruding end to remove the protective layer.

No worries! Any small bubbles will disappear within 24 hours.

---

Contents of the application set

Bizon Glass Hydrogel Back, in addition to 1 piece of hydrogel film, also includes:

• 1 dry microfiber cloth
• 1 wet cloth for cleaning the back of the phone
• 3 positioning stickers
• Dust Absorber (for picking up dust particles)
• Application support card

Bizon provides eco-friendly packaging, which uses only trace amounts of plastic!